Oak Turnmill Chestnut

From £115.00
prices are plus VAT per sqm.
Samples are Free of charge (up to four). For larger quantites please contact us by email or call us on 020 7148 5265.

Our Turnmill range highlights the natural features of European Oak, and is actually made from railway sleepers.
It is an engineered board with a reclaimed look, finished with a hardwax oil.

We cleave this wood rather than saw it, which means the grain of the wood gets separated in a natural way. The surface of these boards is heavily textured as a result, and features a wavy surface with open cracks and knots. The boards are then prepared by hand to further highlight the natural patterns in the grain, whilst removing any sharper edges that arise within the rips and tears on the surface.

thickness: 16mm
width: 220mm
length: 800 - 2600mm (random)
structure: engineered 16/4mm
edges: aged
jointing system: tongue and groove
grade: rustic
surface: aged, reclaimed look
finish: hardwax oil
colour variation: mid/high (finish and grading dependent)
accessories: flooring and stairs
ufh suitable: yes, subject to guidelines

 

Further Information
Due to the nature of our turnmill product, please note that large knots can break up in the cleaving process, revealing the base underneath. These knots will be finished along with the board in the same colour hardwax oil. Most of these knots will blend in with the floor but some colours will make them stand out. We advise to allow enough wastage when installing, so you can be selective with the pieces on site if required.

reducer ramp t-section scotia pipe cover l-section flatbeed corner beadstair nosing - bullnose (long)  stair nosing - flatnose (long)  

Related products

View all
North American Black Walnut
From £89.00 sqm
Oak Copenhagen
From £93.00 sqm
Oak Hampstead Slate
From £99.00 sqm
Oak Hampstead White
From £99.00 sqm