Our Turnmill range is designed to show off the natural features of European Oak.
This is an engineered board with a reclaimed look and is finished with a hardwax oil.
Rather than saw this wood, we cleave it with a special blade. This means the grain of the wood gets separated in a natural way. As a result the surface of these boards is heavily textured and features a wavy surface, with open cracks and knots. The boards are then prepared by hand to further highlight the natural patterns in the grain, whilst removing any sharper edges that arise within the rips and tears on the surface.
|length:||800 - 2600mm (random)|
|jointing system:||tongue and groove|
|surface:||aged, reclaimed look|
|colour variation:||mid/high (finish and grading dependent)|
|accessories:||flooring and stairs|
|ufh suitable:||yes, subject to guidelines|
Due to the nature of our turnmill product, please note that large knots can break up in the cleaving process, revealing the base underneath. These knots will be finished along with the board in the same colour hardwax oil. Most of these knots will blend in with the floor but some colours will make them stand out. We advise to allow enough wastage when installing, so you can be selective with the pieces on site if required.