engineered wood floors

 

Oak Turnmill Coal

From £115.00
prices are plus VAT per sqm.
Samples are Free of charge (up to four). For larger quantites please contact us by email or call us on 020 7148 5265.

Our Turnmill range focuses on the natural features of European Oak.
It is an engineered board with a reclaimed look. It is smoked and then finished with a hardwax oil.

We cleave this wood rather than saw it, which means the grain of the wood gets separated in a natural way. As a result the surface of these boards is heavily textured and features a wavy surface, with open cracks and knots. The boards are then finished by hand to enhance the natural patterns in the grain, whilst removing any sharper edges that arise within the rips and tears on the surface.

thickness: 16mm
width: 220mm
length: 800 - 2600mm (random)
structure: engineered 16/4mm
edges: aged
jointing system: tongue and groove
grade: rustic
surface: aged, reclaimed look
finish: hardwax oil
colour variation: mid/high (finish and grading dependent)
accessories: flooring and stairs
ufh suitable: yes, subject to guidelines

 

Further Information
Due to the nature of our turnmill product, please note that large knots can break up in the cleaving process, revealing the base underneath. These knots will be finished along with the board in the same colour hardwax oil. Most of these knots will blend in with the floor but some colours will make them stand out. We advise to allow enough wastage when installing, so you can be selective with the pieces on site if required.

reducer ramp t-section scotia pipe cover l-section flatbeed corner beadstair nosing - bullnose (long)  stair nosing - flatnose (long)  

Related products

View all
Oak Newbury Sawn Marked
From £59.00 sqm
Oak London White
From £59.00 sqm