FLOORING PLANK DIMENSIONS

Width
Width is the extent from side to side and refers to the breadth or wideness of a plank. Our most common flooring widths range from 90mm to 290mm wide.

Length
Length is the longest extent of a plank, measured from end to end. Our Engineered floors are usually all the same length ranging from 1800mm to 2400mm, although some engineered products come in variable lengths. Most of our Solid floors are available in random lengths, and depending on floor specie and/or manufacturer usually between 500mm and 1500mm or for longer lengths, anywhere between 1200mm to 2700mm.

Thickness
This refers to the total thickness of the plank. Our solid floors are usually between 18mm and 20mm while our Engineered are usually between 14mm and 21mm in thick.

Wear Layer
The term “wear layer” refers to the top portion of a plank and its thickness will impact the amount of times a product can be refinished. On solid hardwood floors this is normally the section above the tongue of the plank. In an engineered product, the wear layer is only as thick as the hardwood specie layer at the top of the product, usually 4mm or 6mm. Most manufacturers produce engineered products with enough wear layers to allow for at least one refinish.